The Print.Events Windows app is for when you want to have your printer connected to a Windows PC (such as a Microsoft Surface tablet or your old dusty laptop), and print to there from the iOS Booth.Events app.
The Print.Events app facilitates sharing the printer from your Windows PC to your iPad or iPhone or Mac running the Booth.Events app.
The Booth.Events Terms and Conditions and Privacy Policy apply: we assume no liability for any issues caused by this software. By downloading or using this software, you agree to the Terms and Conditions.
Requirements
Windows PC with Windows 10 or newer, 300 MB of disk space available during installation
Booth.Events iOS app, version 1.43.0 or newer (released March 18 2025, requires iOS 17.2 or macOS)
Print.Events Download link
Current Version: 1.5.9.5
Changes since 1.5.9.3:
Fixed Media Remaining count for DS620
Fixes DNP QW410 printer showing as "Not Ready" when it is ready
Fixes several rare issues that can cause the app to not print
Previous versions
Previous versions
Installation Instructions
Installation Instructions
On a Windows PC, double-click the downloaded file to start the install process.
If you're using Edge to download, you probably need to click the three dots next to the file download and choose "Keep" before the file will be available.
The application will open after installation, and will also open each time the PC is rebooted.
Make sure you turn off Windows Firewall (Defender).
Setting up a Windows PC for Print.Events
Setting up a Windows PC for Print.Events
This video shows the entire process, including unboxing 2 of the most affordable top-rated mini-PCs from Amazon, setting up Windows, configuring network settings, installing the app, and connecting it to the iPad.
It's a long video, so the YouTube video description has chapters that you can click to go directly where you want. We recommend opening the video on YouTube directly: click "Watch on YouTube" on the video.
Upgrade & Uninstall Instructions
Upgrade & Uninstall Instructions
If you already have an older version installed, you must uninstall the existing version first, before installing the new version. To uninstall the app, use the standard Windows program removal method. If you're not familiar, here's how: https://support.microsoft.com/en-us/windows/uninstall-or-remove-apps-and-programs-in-windows-4b55f974-2cc6-2d2b-d092-5905080eaf98#id0ebd=windows_11
Add your printer in the iOS App
Add your printer in the iOS App
First make sure you allow Booth.Events local network access. Ensure your iPad and printer are on the same network. We recommend using ethernet for stability and performance but you can also use WIFI if you choose to. Once you have verified these pieces of information launch your event and simply click Add on the pop up before tapping ok. Your printer should show here, if you aren't seeing your printer go ahead and tap on the troubleshooter.
For further directions on printer settings including how to cut strips and other features check out this article.
When you tap the printer row after you added it and open printer settings, you'll notice that Print.Events printers have one extra setting called Overscan.
This setting controls the "zoom" of the image as it is printed. So if you are seeing white lines around the sides of your print, try increasing overscan. If you are finding the sides of the print are cut off, try reducing overscan.